.. meta::
   :description: Learn about workload tuning on AMD Instinct MI300X GPUs for optimal performance.
   :keywords: AMD, Instinct, MI300X, HPC, tuning, BIOS settings, NBIO, ROCm,
              environment variable, performance, HIP, Triton, PyTorch TunableOp, vLLM, RCCL,
              MIOpen, GPU, resource utilization

*****************************************
AMD Instinct MI300X workload optimization
*****************************************

This document provides guidelines for optimizing the performance of AMD
Instinct™ MI300X GPUs, with a particular focus on GPU kernel
programming, high-performance computing (HPC), and deep learning operations
using PyTorch. It delves into specific workloads such as
:ref:`model inference <mi300x-vllm-optimization>`, offering strategies to
enhance efficiency.

The following topics highlight :ref:`auto-tunable configurations <mi300x-auto-tune>` as
well as :ref:`Triton kernel optimization <mi300x-triton-kernel-performance-optimization>`
for meticulous tuning.

Workload tuning strategy
========================

By following a structured approach, you can systematically address
performance issues and enhance the efficiency of your workloads on AMD Instinct
MI300X GPUs.

Measure the current workload
----------------------------

Begin by evaluating the performance of your workload in its current state. This
involves running benchmarks and collecting performance data to establish a
baseline. Understanding how your workload behaves under different conditions
provides critical insights into where improvements are needed.

.. _mi300x-profiling-start:

Identify tuning requirements
----------------------------

Analyze the collected performance data to identify areas where tuning is
required. This could involve detecting bottlenecks in CPU, GPU, memory, or data
transfer. Understanding these requirements will help direct your optimization
efforts more effectively.

Profiling is a fundamental step in workload tuning. It allows you to gather
detailed information about how your workload utilizes system resources, and
where potential inefficiencies lie. Profiling tools can provide insights into
both high-level and granular performance metrics. See :ref:`mi300x-profiling-tools`.

High-level profiling tools
^^^^^^^^^^^^^^^^^^^^^^^^^^

For a broad overview, use tools like the
:ref:`PyTorch Profiler <mi300x-pytorch-profiler>`, which helps in
understanding how PyTorch operations are executed and where time is spent. This
is particularly useful for developers new to workload tuning, as it provides a
comprehensive view without requiring in-depth knowledge of lower-level
operations.

Kernel-level profiling tools
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

When profiling indicates that GPUs are a performance bottleneck, delve deeper
into kernel-level profiling. Tools such as the
:ref:`ROCr Debug Agent <mi300x-rocr-debug-agent>`,
:ref:`ROCProfiler <mi300x-rocprof>`, and
:ref:`ROCm Compute Profiler <mi300x-rocprof-compute>` offer detailed insights
into GPU kernel execution. These tools can help isolate problematic GPU
operations and provide data needed for targeted optimizations.

Analyze and tune
----------------

Based on the insights gained from profiling, focus your tuning efforts on the
identified bottlenecks. This might involve optimizing specific kernel
operations, adjusting memory access patterns, or modifying computational
algorithms.

The following subsections discuss optimization ranging from high-level and more
automated strategies to more involved, hands-on optimization.

Optimize model inference with vLLM
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

vLLM provides tools and techniques specifically designed for efficient model
inference on AMD Instinct GPUs. See the official `vLLM installation docs
<https://docs.vllm.ai/en/latest/getting_started/installation/gpu.html>`__ for
installation guidance. Optimizing performance with vLLM involves configuring
tensor parallelism, leveraging advanced features, and ensuring efficient
execution.

* Configuration for vLLM: Set engine arguments according to workload
  requirements.

* Benchmarking and performance metrics: Measure latency and throughput to
  evaluate performance.

.. seealso::

   See :doc:`vllm-optimization` to learn more about vLLM performance
   optimization techniques.

.. _mi300x-auto-tune:

Auto-tunable configurations
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Auto-tunable configurations can significantly streamline performance
optimization by automatically adjusting parameters based on workload
characteristics. For example:

* PyTorch: Utilize :ref:`PyTorch’s built-in auto-tuning features <mi300x-torchinductor-tuning>`,
  such as the :ref:`TunableOp <mi300x-tunableop>` module, which helps in
  optimizing operation performance by exploring different configurations.

* MIOpen: Leverage :ref:`MIOpen’s auto-tuning capabilities <mi300x-miopen-tuning>`
  for convolutional operations and other primitives to find optimal settings for
  your specific hardware.

* Triton: Use :ref:`Triton’s auto-tuning features <mi300x-autotunable-kernel-config>`
  to explore various kernel configurations and select the best-performing ones.

Manual tuning
^^^^^^^^^^^^^

Advanced developers can manually adjust parameters and configurations to
optimize performance. Both Triton and HIP involve manual tuning aspects.

* ROCm libraries: Optimize GPU performance by adjusting various parameters and
  configurations within :ref:`ROCm libraries <mi300x-rocm-library-tuning>`. This
  approach involves hands-on optimization to maximize efficiency for specific
  workloads.

* Triton: Tune Triton kernels by adjusting parameters tailored to
  your workload to
  :ref:`optimize GPU resource utilization <mi300x-triton-gpu-utilization>` and
  better :ref:`leverage specific hardware features <mi300x-assembly-analysis>`.

* HIP: Profile and :ref:`optimize HIP kernels <mi300x-hip-optimization>` by
  optimizing parallel execution, memory access patterns, and other aspects.

Iterate and validate
--------------------

Optimization is an iterative process. After applying tuning changes, re-profile
the workload to validate improvements and ensure that the changes have had the
desired effect. Continuous iteration helps refine the performance gains and
address any new bottlenecks that may emerge.

ROCm provides a prebuilt optimized Docker image that has everything required to implement
the LLM inference tips in this section. It includes ROCm, PyTorch, and vLLM.
For more information, see :doc:`/how-to/rocm-for-ai/inference/benchmark-docker/vllm`.

.. _mi300x-profiling-tools:

Profiling tools
===============

AMD profiling tools provide valuable insights into how efficiently your
application utilizes hardware and help diagnose potential bottlenecks that
contribute to poor performance. Developers targeting AMD GPUs have multiple
tools available depending on their specific profiling needs.

* ROCProfiler tool collects kernel execution performance
  metrics. For more information, see the
  :doc:`ROCProfiler <rocprofiler:index>`
  documentation.

* ROCm Compute Profiler builds upon ROCProfiler but provides more guided analysis.
  For more information, see
  :doc:`ROCm Compute Profiler documentation <rocprofiler-compute:index>`.

Refer to :doc:`profiling-and-debugging`
to explore commonly used profiling tools and their usage patterns.

Once performance bottlenecks are identified, you can implement an informed workload
tuning strategy. If kernels are the bottleneck, consider:

* :ref:`Auto-tuning in PyTorch with TunableOp <mi300x-tunableop>`

* :ref:`Auto-tuning in MIOpen <mi300x-miopen-tuning>`

* :ref:`Triton auto-tunable kernel configurations <mi300x-autotunable-kernel-config>`

If auto-tuning does not meet your requirements, consider
:ref:`mi300x-triton-kernel-performance-optimization`.

If the issue is multi-GPU scale-out, try
:ref:`RCCL tuning and configuration <mi300x-rccl>`.

This section discusses profiling and debugging tools and some of their common usage patterns with ROCm applications.

.. _mi300x-pytorch-profiler:

PyTorch Profiler
----------------

`PyTorch Profiler <https://pytorch.org/docs/stable/profiler.html>`_ can be invoked inside Python scripts, letting you
collect CPU and GPU performance metrics while the script is running. See the `PyTorch Profiler tutorial
<https://pytorch.org/tutorials/recipes/recipes/profiler_recipe.html>`_ for more information.

You can then visualize and view these metrics using an open-source profile visualization tool like
`Perfetto UI <https://ui.perfetto.dev>`_.

#. Use the following snippet to invoke PyTorch Profiler in your code.

   .. code-block:: python

      import torch
      import torchvision.models as models
      from torch.profiler import profile, record_function, ProfilerActivity
      model = models.resnet18().cuda()
      inputs = torch.randn(2000, 3, 224, 224).cuda()

      with profile(activities=[ProfilerActivity.CPU, ProfilerActivity.CUDA]) as prof:
          with record_function("model_inference"):
              model(inputs)
      prof.export_chrome_trace("resnet18_profile.json")

#. Profile results in ``resnet18_profile.json`` can be viewed by the Perfetto visualization tool. Go to
   `<https://ui.perfetto.dev>`__ and import the file. In your Perfetto visualization, you'll see that the upper section
   shows transactions denoting the CPU activities that launch GPU kernels while the lower section shows the actual GPU
   activities where it processes the ``resnet18`` inferences layer by layer. 

   .. figure:: ../../../data/how-to/tuning-guides/perfetto-trace.svg
      :width: 800

      Perfetto trace visualization example.

ROCm profiling tools
--------------------

Heterogenous systems, where programs run on both CPUs and GPUs, introduce additional complexities. Understanding the
critical path and kernel execution is all the more important. So, performance tuning is a necessary component in the
benchmarking process.

With AMD's profiling tools, developers are able to gain important insight into how efficiently their application is
using hardware resources and effectively diagnose potential bottlenecks contributing to poor performance. Developers
working with AMD Instinct GPUs have multiple tools depending on their specific profiling needs; these include:

* :ref:`ROCProfiler <mi300x-rocprof>`

* :ref:`ROCm Compute Profiler <mi300x-rocprof-compute>`

* :ref:`ROCm Systems Profiler <mi300x-rocprof-systems>`

.. _mi300x-rocprof:

ROCProfiler
^^^^^^^^^^^

:doc:`ROCProfiler <rocprofiler:index>` is primarily a low-level API for accessing and extracting GPU hardware performance
metrics, commonly called *performance counters*. These counters quantify the performance of the underlying architecture
showcasing which pieces of the computational pipeline and memory hierarchy are being utilized.

Your ROCm installation contains a script or executable command called ``rocprof`` which provides the ability to list all
available hardware counters for your specific GPU, and run applications while collecting counters during
their execution.

This ``rocprof`` utility also depends on the :doc:`ROCTracer and ROC-TX libraries <roctracer:index>`, giving it the
ability to collect timeline traces of the GPU software stack as well as user-annotated code regions.

.. note::

   ``rocprof`` is a CLI-only utility where inputs and outputs take the form of text and CSV files. These
   formats provide a raw view of the data and puts the onus on the user to parse and analyze. ``rocprof``
   gives the user full access and control of raw performance profiling data, but requires extra effort to analyze the
   collected data.

.. _mi300x-rocprof-compute:

ROCm Compute Profiler
^^^^^^^^^^^^^^^^^^^^^

:doc:`ROCm Compute Profiler <rocprofiler-compute:index>` is a system performance profiler for high-performance computing (HPC) and
machine learning (ML) workloads using Instinct GPUs. Under the hood, ROCm Compute Profiler uses
:ref:`ROCProfiler <mi300x-rocprof>` to collect hardware performance counters. The ROCm Compute Profiler tool performs
system profiling based on all approved hardware counters for Instinct
GPU architectures. It provides high level performance analysis features including System Speed-of-Light, IP
block Speed-of-Light, Memory Chart Analysis, Roofline Analysis, Baseline Comparisons, and more.

ROCm Compute Profiler takes the guesswork out of profiling by removing the need to provide text input files with lists of counters
to collect and analyze raw CSV output files as is the case with ROCProfiler. Instead, ROCm Compute Profiler automates the collection
of all available hardware counters in one command and provides graphical interfaces to help users understand and
analyze bottlenecks and stressors for their computational workloads on AMD Instinct GPUs.

.. note::

   ROCm Compute Profiler collects hardware counters in multiple passes, and will therefore re-run the application during each pass
   to collect different sets of metrics.

.. figure:: ../../../data/how-to/tuning-guides/rocprof-compute-analysis.png
   :width: 800

   ROCm Compute Profiler memory chart analysis panel.

In brief, ROCm Compute Profiler provides details about hardware activity for a particular GPU kernel. It also supports both
a web-based GUI or command-line analyzer, depending on your preference.

.. _mi300x-rocprof-systems:

ROCm Systems Profiler
^^^^^^^^^^^^^^^^^^^^^

:doc:`ROCm Systems Profiler <rocprofiler-systems:index>` is a comprehensive profiling and tracing tool for parallel applications,
including HPC and ML packages, written in C, C++, Fortran, HIP, OpenCL, and Python which execute on the CPU or CPU and
GPU. It is capable of gathering the performance information of functions through any combination of binary
instrumentation, call-stack sampling, user-defined regions, and Python interpreter hooks.

ROCm Systems Profiler supports interactive visualization of comprehensive traces in the web browser in addition to high-level
summary profiles with ``mean/min/max/stddev`` statistics. Beyond runtime
information, ROCm Systems Profiler supports the collection of system-level metrics such as CPU frequency, GPU temperature, and GPU
utilization. Process and thread level metrics such as memory usage, page faults, context switches, and numerous other
hardware counters are also included.

.. tip::

   When analyzing the performance of an application, it is best not to assume you know where the performance
   bottlenecks are and why they are happening. ROCm Systems Profiler is the ideal tool for characterizing where optimization would
   have the greatest impact on the end-to-end execution of the application and to discover what else is happening on the
   system during a performance bottleneck.

.. figure:: ../../../data/how-to/tuning-guides/rocprof-systems-timeline.png
   :width: 800

   ROCm Systems Profiler timeline trace example.

vLLM performance optimization
=============================

vLLM is a high-throughput and memory efficient inference and serving engine for
large language models that has gained traction in the AI community for its
performance and ease of use. See :doc:`vllm-optimization`, where you'll learn
how to:

* Enable AITER (AI Tensor Engine for ROCm) to speed up on LLM models.
* Configure environment variables for optimal HIP, RCCL, and Quick Reduce performance.
* Select the right attention backend for your workload (AITER MHA/MLA vs. Triton).
* Choose parallelism strategies (tensor, pipeline, data, expert) for multi-GPU deployments.
* Apply quantization (``FP8``/``FP4``) to reduce memory usage by 2-4× with minimal accuracy loss.
* Tune engine arguments (batch size, memory utilization, graph modes) for your use case.
* Benchmark and scale across single-node and multi-node configurations.

.. _mi300x-tunableop:

PyTorch TunableOp
==================

`TunableOp <https://github.com/pytorch/pytorch/blob/main/aten/src/ATen/cuda/tunable/README.md>`_
is a feature used to obtain the optimal GPU kernel for a key PyTorch operations. At the moment,
TunableOp supports the tuning of dense matrix multiplies (GEMM, batched GEMM, GEMM and bias, and scaled GEMM).
This feature is useful for squeezing out the last bit of performance.
In short, it will try up to thousands of matrix multiply algorithms that are available in rocBLAS and hipBLASLt.
A caveat is that as the math libraries improve over time, there is a less benefit to using TunableOp,
and there is also no guarantee that the workload being tuned will be able to outperform the default GEMM algorithm in hipBLASLt.

Some additional references for PyTorch TunableOp include `ROCm blog <https://rocm.blogs.amd.com/artificial-intelligence/pytorch-tunableop/README.html>`__, 
TunableOp `README <https://github.com/pytorch/pytorch/blob/main/aten/src/ATen/cuda/tunable/README.md>`__, and 
`llm tuning <https://rocm.docs.amd.com/en/latest/how-to/llm-fine-tuning-optimization/model-acceleration-libraries.html#fine-tuning-llms-pytorch-tunableop>`__.

The three most important environment variables for controlling TunableOp are:

``PYTORCH_TUNABLEOP_ENABLED``
   The main on/off switch for all TunableOp implementations. Default is ``0`` (disabled). Set to ``1`` to enable.

``PYTORCH_TUNABLEOP_TUNING``
   When enabled, if a tuned entry isn't found, runs the tuning step and records the entry. Default is ``1`` (enabled). Set to ``0`` to disable.

``PYTORCH_TUNABLEOP_VERBOSE``
   Enables verbose output for debugging purposes -- it can be useful to see if TunableOp is being used at all. Default is ``0`` (disabled). Set to ``1`` to enable.

For the complete list of environment variables, see the
TunableOp `README <https://github.com/pytorch/pytorch/blob/main/aten/src/ATen/cuda/tunable/README.md>`__.
There are also Python APIs to set some of these environment variables,
but the preferred way to set the TunableOp tuning parameters is to use the environment variables.

Workflow
--------

Use these environment variables to enable TunableOp for any applications or libraries that use PyTorch (2.3 or later).

The first step is the tuning pass:

1. Enable TunableOp and tuning. Optionally enable verbose mode: 

   .. code-block:: shell

      PYTORCH_TUNABLEOP_ENABLED=1 PYTORCH_TUNABLEOP_VERBOSE=1 your_script.sh

   This pass can be very slow. The output will be the ``tunableop_results.csv`` file containing a list of GEMMs encountered
   and the optimal GPU kernel that was identified.



   Multi-GPU tuning is supported, producing a separate tunableop_results.csv file for each GPU. The
   tuning algorithm executes independently on each GPU, with each tuning process sandboxed to its
   respective GPU. There is no inter-GPU communication during tuning.

   For data-parallel algorithms, where GEMM configurations across GPUs are typically identical, this
   approach can result in redundant work. In such cases, running the workload on a single GPU might
   suffice. However, for algorithms involving multiple levels of parallelism (as in data parallelism
   combined with ML model parallelism), different GPUs might require distinct GEMM parameters. In
   these scenarios, a multi-GPU configuration is recommended.

In the second step, we re-run the workload with optimal configuration using the ``tunableop_results.csv`` file obtained in step 1.

2. Enable TunableOp, disable tuning, and measure:

   .. code-block:: shell

      PYTORCH_TUNABLEOP_ENABLED=1 PYTORCH_TUNABLEOP_TUNING=0 your_script.sh

Compare the wall-clock time from this second step to your reference wall-clock time with TunableOp completely disabled (``PYTORCH_TUNABLEOP_ENABLED=0``).

Offline tuning
--------------

A new feature of TunableOp, offline tuning, is available in upstream PyTorch and supported in PyTorch 2.6 or later.

Traditionally, tuning is performed in-place during workload execution. While convenient for one-off
tuning, this approach can become cumbersome if frequent re-tuning is required -- such as when a new
version of a math library is released. In these cases, re-running the workload and performing tuning
repeatedly can be inefficient.

Offline tuning addresses this challenge by decoupling the tuning process from workload execution. It
enables the collection of GEMMs from a workload during a collection pass, followed by tuning these
GEMMs in a separate tuning pass, without re-running the original workload. This approach
significantly reduces compute resource requirements, particularly for time-intensive workloads.

For workflow instructions, refer to the `Offline Tuning documentation <https://github.com/pytorch/pytorch/blob/main/aten/src/ATen/cuda/tunable/README.md#offline-tuning>`_.

.. _mi300x-torchinductor-tuning:

PyTorch inductor max-autotune tuning knobs
==========================================

The following are suggestions for optimizing matrix multiplication (GEMM) and
convolution (``conv``) operations in PyTorch using ``inductor``, a part of the
PyTorch compilation framework.

Learn more about TorchInductor environment variables and usage in the
`PyTorch documentation <https://pytorch.org/docs/2.3/torch.compiler_inductor_profiling.html>`_.

.. note::

   Triton is not used if regular :doc:`MIOpen <miopen:index>` or
   :doc:`rocBLAS <rocblas:index>` performs faster for a specific operation.

.. note::

   Experimental: TunableOp (see the :ref:`PyTorch TunableOp <mi300x-tunableop>` section) can also be used in combination
   with ``TorchInductor`` ``max-autotune`` mode to boost ATen GEMM performance but will further increase tuning time.
   The environment variable ``TORCHINDUCTOR_AUTOTUNE_MULTI_DEVICE=1`` can be useful in single GPU workloads to distribute Triton GEMM tuning.

Triton backend
--------------

The goal is to leverage Triton to achieve better performance. To tune Triton kernels with ``gemm`` and convolution ops (``conv``), use the
``torch.compile`` function with the ``max-autotune`` mode. This benchmarks a
predefined list of Triton configurations and selects the fastest one for each
shape. See the configurations in PyTorch source code:

* `conv configurations for "max-autotune" <https://github.com/pytorch/pytorch/blob/a1d02b423c6b4ccacd25ebe86de43f650463bbc6/torch/_inductor/kernel/conv.py#L51>`_

* `matmul configurations for "max-autotune" <https://github.com/pytorch/pytorch/blob/a1d02b423c6b4ccacd25ebe86de43f650463bbc6/torch/_inductor/kernel/mm_common.py#L118>`_

This tuning will select the best Triton ``gemm`` configurations according to tile-size 
``(BLOCK_M, BLOCK_N, BLOCK_K), num_stages, num_warps`` and ``mfma`` instruction size ( ``matrix_instr_nonkdim`` ) 
(see "Triton kernel optimization" section for more details).

* Set ``torch._inductor.config.max_autotune = True`` or ``TORCHINDUCTOR_MAX_AUTOTUNE=1``.

* Or, for more fine-grained control:

  ``torch._inductor.config.max_autotune_gemm = True``
     To enable tuning or lowering of ``mm``/``conv``\s.

  ``torch._inductor.config.max_autotune.pointwise = True``
     To enable tuning for ``pointwise``/``reduction`` ops.

  ``torch._inductor.max_autotune_gemm_backends`` or ``TORCHINDUCTOR_MAX_AUTOTUNE_GEMM_BACKENDS``
     Selects the candidate backends for ``mm`` auto-tuning. Defaults to
     ``TRITON,ATEN``. 
     Limiting this to ``TRITON`` might improve performance by
     enabling more fused ``mm`` kernels instead of going to rocBLAS.

* Inference can see large improvements on AMD GPUs by utilizing
  ``torch._inductor.config.freezing=True`` or the ``TORCHINDUCTOR_FREEZING=1`` variable, which
  in-lines weights as constants and enables constant folding optimizations.

* Enabling ``inductor``’s cpp_wrapper might improve overhead. This generates
  C++ code which launches Triton binaries directly with
  ``hipModuleLaunchKernel`` and relies on `hipification`.

  ``torch._inductor.config.cpp_wrapper=True`` or ``TORCHINDUCTOR_CPP_WRAPPER=1``

* Convolution workloads might see a performance benefit by specifying  
  ``torch._inductor.config.layout_optimization=True`` or ``TORCHINDUCTOR_LAYOUT_OPTIMIZATION=1``.
  This can help performance by enforcing ``channel_last`` memory format on the
  convolution in TorchInductor, avoiding any unnecessary transpose operations. 
  Note that ``PYTORCH_MIOPEN_SUGGEST_NHWC=1`` is recommended if using this.

* To extract the Triton kernels generated by ``inductor``, set the environment variable
  ``TORCH_COMPILE_DEBUG=1``, which will create a ``torch_compile_debug/`` directory
  in the current path. The wrapper codes generated by ``inductor`` are in one or more
  ``output_code.py`` files corresponding to the FX graphs associated with the model.
  The Triton kernels are defined in these generated codes.


Composable Kernel backend
--------------------------

You can enable the Composable Kernel (``CK``) backend by appending ``CK`` to the comma-separated list of backends. This allows the
auto-tuning process to use kernels from the Composable Kernel library.

``torch._inductor.max_autotune_gemm_backends`` or ``TORCHINDUCTOR_MAX_AUTOTUNE_GEMM_BACKENDS``.

Install the Composable Kernel library's Python wrapper via pip using the following command:

.. code-block:: shell

   pip install git+https://github.com/rocm/composable_kernel@develop

This wrapper library is responsible for constructing a list of kernel instances available in the Composable Kernel library,
as well as storing the kernel instance C++ includes in a known location (so clang can look into these paths when compiling the ``gemm`` auto-tune candidates).

  * ``matmul`` (with ``float16`` and ``bfloat16`` inputs, row-major X, row-major or column-major W)
  * ``addmm`` (with ``float16`` or ``bfloat16`` X, W and Bias; row-major X, row-major or column-major W; Bias can be broadcast either along row-major or column-major dimension)
  * ``scaled_mm`` (``float8_e4m3fnuz`` inputs, ``bfloat16`` output)
  * ``conv2d`` (with ``float32``, ``float16`` or ``bfloat16`` inputs, channels-last weight layout)

* For working examples, see `test/inductor/test_ck_backend.py <https://github.com/pytorch/pytorch/blob/main/test/inductor/test_ck_backend.py>`_.

* Compiling or build time can be configured by modifying ``torch._inductor.config`` to reduce the build time to avoid time-out.

  * ``compile_threads``: Number of threads used for compilation. Set it to the number of available CPU cores.
  * ``rocm.n_max_profiling_configs``: Limiting the number of kernels to speed up compilation.

* Setting environment variable ``PYTORCH_MIOPEN_SUGGEST_NHWC=1`` to optimize convolution operations.

Debugging and troubleshooting performance:

* Generate a standalone executable runner to debug or assess kernels' performance by setting environment variable
  ``INDUCTOR_CK_BACKEND_GENERATE_TEST_RUNNER_CODE=1`` to facilitate debugging and profiling. By default,
  the CK backend will not build a standalone executable runner.
* Enable debug by passing compilation flags (e.g., ``is_debug``) to clang when compiling the kernels in ``torch._inductor.config.rocm`` class.
* The generated source files and other products of clang compilation are located in the torch inductor root directory (default: ``/tmp/torchinductor_root``)

.. _mi300x-rocm-library-tuning:

ROCm library tuning
===================

ROCm library tuning involves optimizing the performance of routine computational
operations (such as ``GEMM``) provided by ROCm libraries like
:ref:`hipBLASLt <mi300x-hipblaslt>`, :ref:`Composable Kernel <mi300x-ck>`,
:ref:`MIOpen <mi300x-miopen>`, and :ref:`RCCL <mi300x-rccl>`. This tuning aims
to maximize efficiency and throughput on Instinct MI300X GPUs to gain 
improved application performance.

.. _mi300x-library-gemm:

GEMM (general matrix multiplication)
------------------------------------

GEMMs (General Matrix Multiplications) are a fundamental building block for many operations in neural networks.
GEMM is defined as ``C = αAB + βC`` where A is an ``MxK`` matrix input and B is ``KxN`` matrix input,
and C is ``MxN`` matrix input and is overwritten by the output. α and β are scalar inputs.
hipBLASLt is a library that provides general matrix-matrix operations with a flexible API
and extends functionalities beyond a traditional BLAS library.

.. _mi300x-hipblaslt:

hipBLASLt benchmarking
^^^^^^^^^^^^^^^^^^^^^^

The GEMM library
`hipBLASLt <https://rocm.docs.amd.com/projects/hipBLASLt/en/latest/index.html>`_
provides a benchmark tool for its supported operations. Refer to the
`documentation <https://github.com/ROCm/hipBLASLt/blob/develop/clients/bench/README.md>`_
for details.

* Example 1: Benchmark mix fp8 GEMM

  .. code-block:: shell

     HIP_FORCE_DEV_KERNARG=1  hipblaslt-bench --alpha 1 --beta 0 -r f16_r \
     --a_type f16_r --b_type f8_r --compute_type f32_f16_r \
     --initialization trig_float  --cold_iters 100 --iters 1000 --rotating 256

* Example 2: Benchmark forward epilogues and backward epilogues

  *  ``HIPBLASLT_EPILOGUE_RELU: "--activation_type relu";``

  *  ``HIPBLASLT_EPILOGUE_BIAS: "--bias_vector";``

  *  ``HIPBLASLT_EPILOGUE_RELU_BIAS: "--activation_type relu --bias_vector";``

  *  ``HIPBLASLT_EPILOGUE_GELU: "--activation_type gelu";``

  *  ``HIPBLASLT_EPILOGUE_DGELU": --activation_type gelu --gradient";``

  *  ``HIPBLASLT_EPILOGUE_GELU_BIAS: "--activation_type gelu --bias_vector";``

  *  ``HIPBLASLT_EPILOGUE_GELU_AUX: "--activation_type gelu --use_e";``

  *  ``HIPBLASLT_EPILOGUE_GELU_AUX_BIAS: "--activation_type gelu --bias_vector --use_e";``

  *  ``HIPBLASLT_EPILOGUE_DGELU_BGRAD: "--activation_type gelu --bias_vector --gradient";``

  *  ``HIPBLASLT_EPILOGUE_BGRADA: "--bias_vector --gradient --bias_source a";``

  *  ``HIPBLASLT_EPILOGUE_BGRADB:  "--bias_vector --gradient --bias_source b";``


hipBLASLt auto-tuning using hipblaslt-bench
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Use the auto-tuning tool in hipBLASLt to get the best solution for a given problem size.

Prerequisite
''''''''''''

Build hipBLASLt.
See the `hipBLASLt repository <https://github.com/ROCm/hipBLASLt>`_ to see detailed build instructions.

Quick start
'''''''''''

Create a working folder for the auto-tuning tool, for example, ``tuning/``.

1. Set the ``ProblemType``, ``TestConfig``, and ``TuningParameters`` in the YAML file. You can modify the template YAML file in ``hipblaslt/utilities``.

.. figure:: ../../../data/how-to/tuning-guides/hipblaslt_yaml_template.png
   :align: center
   :alt: HipBLASLt auto-tuning yaml file template

2. Run the following command to start tuning.

   .. code-block:: shell

      # python3 hipblaslt/utilities/find_exact.py <path-to-config-yaml> <path-to-the-root-of-built-hipblaslt> <working-directory>
      # Assume we're in folder tuning, the default root of the build folder of hipblaslt is hipblaslt/build/release
      python3 ../hipblaslt/utilities/find_exact.py tuning.yaml hipblaslt/build/release ./


Output
''''''

The tool will create two output folders. The first one is the benchmark results, 
the second one is the generated equality kernels. If ``SplitK`` is used, the solution's ``GlobalSplitU`` will 
also change if the winner is using a different ``SplitK`` from the solution. The YAML files generated inside the 
folder ``1_LogicYaml`` are logic ones. These YAML files are just like those generated from TensileLite.

.. figure:: ../../../data/how-to/tuning-guides/hipblaslt_auto_tuning_output_files.png
   :align: center
   :alt: HipBLASLt auto-tuning output folder


A quick view of the config YAML
'''''''''''''''''''''''''''''''

The tuning tool is a two-step tool. It first runs the benchmark, then it creates the equality YAML for the user. Note that this config YAML file is different from the config YAML used in TensileLite.

* **Benchmarking**

  The first step is to run the benchmark, ``find_exact.py`` will run the benchmark with ``hipblaslt-bench``.
  For the default configurations, see the Python file.

  .. code-block:: python

     defaultBenchOptions = {"ProblemType": {
         "TransposeA": 0,
         "TransposeB": 0,
         "ComputeInputDataType": "s",
         "ComputeDataType": "s",
         "DataTypeC": "s",
         "DataTypeD": "s",
         "UseBias": False
     }, "TestConfig": {
         "ColdIter": 20,
         "Iter": 100,
         "AlgoMethod": "all",
         "RequestedSolutions": 2, # Only works in AlgoMethod heuristic
         "SolutionIndex": None, # Only works in AlgoMethod index
         "ApiMethod": "cpp",
         "RotatingBuffer": 0,
     }, "TuningParameters": {
         "SplitK": [0]
     }, "ProblemSizes": []}
     defaultCreateLogicOptions = {}  # Currently unused

* ``TestConfig``
   1. ``ColdIter``: This is number the warm-up iterations before starting the kernel benchmark.
   2. ``Iter``: This is the number of iterations in kernel benchmarking
   3. ``AlgoMethod``: We recommended to keep this unchanged because method "all" returns all the available solutions for the problem type.
   4. ``ApiMethod``: We have c, mix, and cpp. Doesn't affect the result much.
   5. ``RotatingBuffer``: This is a size in the unit of MB. Recommended to set the value equal to the size of the cache of the card to avoid the kernel fetching data from the cache.
   
* ``TuningParameters``
   ``SplitK``: Divide ``K`` into ``N`` portions. Not every solution supports ``SplitK``. 
   The solution will be skipped if not supported.

* ``CreateLogic``
   Currently no control parameters.

hipBLASLt backend assembly generator tuning
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

:doc:`hipBLASLt <hipblaslt:index>` has a backend assembly generator in
`hipBLASLt's GitHub repository <https://github.com/ROCm/hipBLASLt/tree/develop/tensilelite>`_,
named TensileLite. TensileLite enables performance optimization by tuning the backend assembly generator.
The following section explains how to use TensileLite to tune hipBLASLt for better performance.

.. code-block:: shell

   cd /hipBLASLt/tensilelite
   ./Tensile/bin/Tensile config.yaml output_path

config.yaml
'''''''''''

This file contains the parameters and settings for the tuning process. Here’s
a breakdown of the important sections:

``GlobalParameters``
   The set of parameters which provides context for the entire tuning exercise.

   Using ``0`` for ``NumElementsToValidate`` is suggested for performance tuning to avoid validation overhead.

   .. code-block:: python

      globalParameters["NumElementsToValidate"] = 0

``BenchmarkProblems``
   Defines the set of kernel specifications as well as the size definitions
   for the tuning exercise.

   * ``ProblemType`` (``OperationType``, ``DataType``, ``TransposeA``, ``TransposeB``)
   * ``BenchmarkCommonParameters`` (the same parameters for all solutions)
   * ``ForkParameters``
   * ``BenchmarkFinalParameters`` (``ProblemSizes``)

``LibraryLogic``
   Specifies the target environment and platform.

   * ``ScheduleName``

     * ``aldebaran`` is MI200

     * ``aquavanjaram`` is MI300

   .. code-block:: shell

      $ ls
      aldebaran  aquavanjaram  navi31  navi32

   .. code-block:: yaml

      LibraryLogic:
        ScheduleName: "aldebaran"
        DeviceNames: [Device 0050, Device 0052, Device 0054, Device 0062, Device 7400]
        ArchitectureName: "gfx90a"

``LibraryClient``
   If defined, this will enable step 4 of the tuning process, which means the final
   library will be created.

   .. code-block:: shell

      $ ls
      aldebaran_Cijk_Ailk_Bjlk_S.yaml

TensileLite tuning flow
------------------------

The TensileLite tuning flow consists of seven steps. In the first six steps,
the programmable benchmarking protocol generates fast kernel candidates. In the
final step (:ref:`step 7 <tensilelite-tuning-step-7>`), these candidates are benchmarked against a predefined set
of problem sizes.

.. _tensilelite-tuning-flow-fig:

.. figure:: ../../../data/how-to/tuning-guides/tensilelite-tuning-flow.png
   :align: center
   :alt: TensileLite tuning flow

.. _tensilelite-tuning-step-1:

Step 1: Initial solution parameters
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Before Tensile is able to benchmark a kernel parameter in Step 2 of the :ref:`preceding figure <tensilelite-tuning-flow-fig>`,
such as ``PrefetchGlobalRead={False, True}``, all other kernel parameters not being measured must be specified.
Therefore, the first step is to initialize a list of default kernel parameters, then subsequent steps of
benchmarking will override a parameter from this default list, with the parameter determined from benchmarking.
Tensile is pre-loaded with default parameters for any unspecified during tuning.

Step 2: Benchmark common parameters
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Benchmarking common parameters determines parameters which are universally preferable to their alternatives
regardless of other parameters. To benchmark common parameters:

* User specifies parameters and values to benchmark.

* Tensile benchmarks all parameter combinations for a user-specified problem size.

* Tensile selects the fastest parameter combination which is now labeled determined and will subsequently be used.

In practice, these parameters are not used, since globally preferred parameters are set as defaults in Tensile and do not need to be re-measured.

Step 3: Fork parameters
^^^^^^^^^^^^^^^^^^^^^^^

Rather than continuing to determine globally fastest parameters, which eventually leads
to a single fastest kernel, forking creates many different kernels,
all of which will be considered for use. All forked
parameters are considered determined, i.e., they aren't measured to determine 
which is fastest. The :ref:`preceding figure <tensilelite-tuning-flow-fig>` shows 7 kernels being forked in Step 3.

Step 4: Benchmark fork parameters
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Next, tuning continues its refinement by determining fastest parameters for
each forked permutation, same as in Step 2.

Step 5: Join parameters
^^^^^^^^^^^^^^^^^^^^^^^

After tuning the forked kernels, joining reduces the list of kernels so that fewer kernels
will be considered for final use. Each kernel in the resulting list must have different values
for the listed ``JoinParameters``, for example, employing ``JoinParameters`` = ``MacroTile`` will result in only a
few final kernels, each with a different ``MacroTile``. If there are multiple kernels with the same ``MacroTile``,
only the fastest is kept. In the above figure the 7 forked kernel have been reduced to 3 joined kernels.

Step 6: Benchmark join parameters
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Users can further tune parameters of the joined kernels. This steps is same as Steps 4 except
that it tunes after joining so that there are fewer kernels to be tuned. In practice,
this step is not used; using Step 4 is preferred so that all parameters are measured before joining.

.. _tensilelite-tuning-step-7:

Step 7: Benchmark final parameters
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

At the conclusion of Step 6, all parameters of all kernels have been determined and the
final set of kernels for consideration has been established. Now all final kernels will be
measured against all problem sizes specified by the user. Problem sizes can be specified
as Range sizes and Exact sizes. Range sizes cause benchmarking of a broad range of sizes,
and Tensile will be able to interpolate which kernel is best even between the specifically
measured sizes. Exact sizes cause a single problem size to be measured, and the final
library is guaranteed to choose the fastest kernel for that size. This final benchmarking
generates the data that is subsequently analyzed for creating the mapping of problem size
to optimal kernel.

Update logic YAML files
------------------------

The logic YAML files in hipBLASLt are located in
``library/src/amd_detail/rocblaslt/src/Tensile/Logic/asm_full/``.

To merge the YAML files from the tuned results in TensileLite, use the
``merge.py`` located in ``tensilelite/Tensile/Utilities`` with the following
command:

.. code-block:: shell

   merge.py original_dir new_tuned_yaml_dir output_dir 

The following table describes the logic YAML files.

+----------------+------------------------------------------------------+
| Logic YAML     | Description                                          |
+================+======================================================+
| ``Equality``   | Update the equality file when your tuned YAML is     |
|                | an exact tuning.                                     |
+----------------+------------------------------------------------------+
| ``GridBased``  | Update the gridbased file when your tuned YAML is    |
|                | a grid-based tuning.                                 |
+----------------+------------------------------------------------------+
| ``FreeSize``   | Update the freesize file when your tuned YAML        |
|                | contains confidential sizes, or others. Note that    |
|                | freesize YAML files do not require any problem size. |
+----------------+------------------------------------------------------+

Tensile optimization and performance tuning tips
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

MI16x16 versus MI32x32
   MI16x16 outperforms MI32x32 due to its superior power efficiency. The MI16x16
   format refers to the ``v_mfma`` instruction (such as
   ``v_mfma_f32_16x16x16f16``). See
   `<https://llvm.org/docs/AMDGPU/AMDGPUAsmGFX940.html#vop3p>`__.

Clock differences among XCDs
   There can be a clock speed variation of 3% to 10% among different XCDs.
   Typically, XCD0 has the highest clock speed, while XCD7 has the lowest on
   MI300X. For optimal efficiency calculations on MI300X, use the XCD with the
   lowest average clock speed. If the average clock speed of XCD0 is used,
   target efficiencies (such as, 95% for DGEMM HPL cases with K=512) may not be
   achievable.

`WorkGroupMapping`
   To maximize L2 cache efficiency, use multiples of the XCD number. For MI300X,
   this means using multiples of 8 (such as, 24, 32, 40).

GEMM stride issues
   On MI300, if the matrix stride in GEMM is a multiple of 512 bytes, it can lead to
   Tagram channel hotspotting issues, causing a significant performance drop, especially for TN
   transpose cases. This can increase the latency of VMEM instructions and cause
   a notable performance drop. To avoid this, use stride padding to ensure the
   stride is not a multiple of 512 bytes (for instance, for TN F16 GEMM, set
   ``lda = ldb = K + 128`` when ``K % 256 == 0``).

.. _mi300x-ck:

Optimizing Composable Kernel GEMM kernels
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The performance of a GEMM kernel is significantly influenced by the input
values. The performance hierarchy based on input value types, from highest to
lowest, is as follows:

* Case 1: [all 0]

* Case 2: [all identical integers]

* Case 3: [random integers]

* Case 4: [random floats]

There can be more than a 20 percent performance drop between Case 1 and Case 4,
and a 10 percent drop between random integers and random floats.

Additionally, ``bf16`` matrix core execution is noticeably faster than ``f16``.

Distributing workgroups with data sharing on the same XCD can enhance
performance (reduce latency) and improve benchmarking stability.

CK provides a rich set of template parameters for generating flexible accelerated 
computing kernels for difference application scenarios.

See :doc:`optimizing-with-composable-kernel`
for an overview of Composable Kernel GEMM kernels, information on tunable
parameters, and examples.

.. _mi300x-miopen:

MIOpen
------

MIOpen is AMD's open-source, deep learning primitives library for GPUs. It
implements fusion to optimize for memory bandwidth and GPU launch overheads,
providing an auto-tuning infrastructure to overcome the large design space of
problem configurations.

Convolution
^^^^^^^^^^^

Many of MIOpen kernels have parameters which affect
their performance. Setting these kernel parameters to optimal values
for a given convolution problem, allows reaching the best possible
throughput. The optimal values of these kernel parameters are saved
in PerfDb (Performance database). PerfDb is populated through
tuning. To manipulate the tuning level, use the environment variable
``MIOPEN_FIND_ENFORCE`` (1-6). Optimal values of kernel parameters are
used to benchmark all applicable convolution kernels for the given
convolution problem. These values reside in the FindDb. To manipulate
how to find the best performing kernel for a given convolution
problem, use the environment variable ``MIOPEN_FIND_MODE`` (1-5).

.. _mi300x-miopen-tuning:

Tuning in MIOpen
^^^^^^^^^^^^^^^^

``MIOPEN_FIND_ENFORCE=DB_UPDATE``, ``2``
   Performs auto-tuning and update to the PerfDb.

``MIOPEN_FIND_ENFORCE=SEARCH``, ``3``
   Only perform auto-tuning if PerfDb does not contain optimized value for a
   given convolution problem

What does :doc:`PerfDb <miopen:conceptual/perfdb>` look like?

.. code-block:: 

   [
    2x128x56xNHWCxF, [
                     ConvAsm1x1U          :  1,8,2,64,2,4,1,8 ;       // optimum kernel params for convolution problem 2x128x56xNHWCxF
                     ConvOclDirectFwd1x1  : 1,128,1,1,0,2,32,4,0;     // optimum kernel params for convolution problem 2x128x56xNHWCxF
                     ],
   2x992x516xNHWCxF, [
                     ConvAsm1x1U          :  64,18,2,64,2,4,41,6 ;    // optimum kernel params for convolution problem 2x992x516xNHWCxF
                     ConvOclDirectFwd1x1  : 54,128,21,21,1,23,32,4,0  // optimum kernel params for convolution problem 2x992x516xNHWCxF
                     ]
    ...
   ]

See :doc:`miopen:conceptual/perfdb` for more information.

Finding the fastest kernel
^^^^^^^^^^^^^^^^^^^^^^^^^^

``MIOPEN_FIND_MODE=NORMAL``, ``1``
   Benchmark all the solvers and return a list (front element is the fastest kernel).

``MIOPEN_FIND_MODE=FAST``, ``2``
   Check FindDb (Find database) if convolution problem is found return - else
   immediate fallback mode (predict the performing kernel parameters based on
   mathematical and AI models).

``MIOPEN_FIND_MODE=HYBRID``, ``3``
   Check FindDb if convolution problem is found return - else benchmark that
   problem.

What does :doc:`FindDb <miopen:conceptual/finddb>` look like?

.. code-block:: 

   [

    2x128x56xNHWCxF, [
                     ConvAsm1x1U          :  0.045 (time), 12312 (workspace), algo_type;
                     ConvOclDirectFwd1x1  : 1.145 (time), 0 (workspace), algo_type;
                     ],

   2x992x516xNHWCxF, [
                     ConvAsm1x1U          :  2.045 (time), 12312 (workspace), algo_type;
                     ConvOclDirectFwd1x1  : 1.145 (time), 0 (workspace), algo_type;
                     ]
    ...
   ]

See :doc:`miopen:how-to/find-and-immediate` for more information.

For example:

.. code-block:: shell

   MIOPEN_FIND_ENFORCE=3 MIOPEN_FIND_MODE=1 ./bin/MIOpenDriver convbfp16 -n 1 -c 1024 -H 14 -W 14 -k 256 -y 1 -x 1 -p 0 -q 0 -u 1 -v 1 -l 1 -j 1 -m conv -g 1 -F 1

.. _mi300x-rccl:

RCCL
----

:doc:`RCCL <rccl:index>` is a stand-alone library of standard collective
communication routines for GPUs, implementing all-reduce, all-gather, reduce,
broadcast, reduce-scatter, gather, scatter, and all-to-all. RCCL supports an
arbitrary number of GPUs installed in a single node or multiple nodes
and can be used in either single- or multi-process (such as MPI)
applications.

The following subtopics include information on RCCL features and optimization
strategies:

* :ref:`Use all eight GPUs <mi300x-rccl-8-gpu>`

* :ref:`Disable NUMA auto-balancing <mi300x-rccl-disable-numa>`

* :ref:`Disable ACS for multi-node RCCL <mi300x-rccl-disable-acs>`

* :ref:`Run RCCL-Unittests <mi300x-rccl-unittests>`

* :ref:`NPKit profiler <mi300x-rccl-npkit>`

* :ref:`RCCL-tests <mi300x-rccl-tests>`

* :ref:`Use one-process-per-GPU mode <mi300x-rccl-one-process-per-gpu>`

* :ref:`RCCL in E2E workloads <mi300x-rccl-e2e>`

.. _mi300x-rccl-8-gpu:

Use all eight GPUs
^^^^^^^^^^^^^^^^^^

In an :ref:`MI300X architecture <mi300x-node-level-arch-fig>`, there are
dedicated links between each pair of GPUs in a fully connected topology.
Therefore, for collective operations, the best performance is achieved
when all 8 GPUs and, hence, all the links between them are used. In the
case of 2- or 4-GPU collective operations (generally less than 8 GPUs),
you can only use a fraction of the potential bandwidth on the node.

The following figure shows an
:doc:`MI300X node-level architecture </conceptual/gpu-arch/mi300>` of a
system with AMD EPYC processors in a dual-socket configuration and eight
AMD Instinct MI300X GPUs. The MI300X OAMs attach to the host system via
PCIe Gen 5 x16 links (yellow lines). The GPUs use seven high-bandwidth,
low-latency AMD Infinity Fabric™ links (red lines) to form a fully connected
8-GPU system.

.. _mi300x-node-level-arch-fig:

.. figure:: ../../../data/shared/mi300-node-level-arch.png

   MI300 Series node-level architecture showing 8 fully interconnected MI300X
   OAM modules connected to (optional) PCIe switches via re-timers and HGX
   connectors.

.. _mi300x-rccl-disable-numa:

Disable NUMA auto-balancing
^^^^^^^^^^^^^^^^^^^^^^^^^^^

In order to reduce performance variability and also achieve better
performance, you need to make sure that NUMA auto-balancing is disabled
on the node.

Check whether NUMA auto-balancing is disabled, by running the
following command: ``cat /proc/sys/kernel/numa_balancing`` and
checking whether the output is ``0``.

If the output is ``1``, you can disable NUMA auto-balancing by running the
following command: ``sudo sysctl kernel.numa_balancing=0``. For more details,
see `AMD Instinct MI300X system optimization
<https://instinct.docs.amd.com/projects/amdgpu-docs/en/latest/system-optimization/mi300x.html#disable-numa-auto-balancing>`_.

.. _mi300x-rccl-disable-acs:

Disable ACS for multi-node RCCL
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Check if ACS is disabled with ``sudo lspci -vvv \| grep -i "acsctl"``.
This will print many lines. Check if there are any that show ``SrcValid+``

If there are any ``SrcValid+``, then use the following ``disable_acs.sh`` script
to disable ACS (requires ``sudo``).

.. code-block:: shell

   #!/bin/bash

   #

   # Disable ACS on every device that supports it

   #

   PLATFORM=$(dmidecode --string system-product-name)

   logger "PLATFORM=${PLATFORM}"

   # Enforce platform check here.

   #case "${PLATFORM}" in

   #"OAM"*)

   #logger "INFO: Disabling ACS is no longer necessary for ${PLATFORM}"

   #exit 0

   #;;

   #*)

   #;;

   #esac

   # must be root to access extended PCI config space

   if [ "$EUID" -ne 0 ]; then

   echo "ERROR: $0 must be run as root"

   exit 1

   fi

   for BDF in \`lspci -d "*:*:*" \| awk '{print $1}'`; do

   # skip if it doesn't support ACS

   setpci -v -s ${BDF} ECAP_ACS+0x6.w > /dev/null 2>&1

   if [ $? -ne 0 ]; then

   #echo "${BDF} does not support ACS, skipping"

   continue

   fi

   logger "Disabling ACS on \`lspci -s ${BDF}`"

   setpci -v -s ${BDF} ECAP_ACS+0x6.w=0000

   if [ $? -ne 0 ]; then

   logger "Error enabling directTrans ACS on ${BDF}"

   continue

   fi

   NEW_VAL=`setpci -v -s ${BDF} ECAP_ACS+0x6.w \| awk '{print $NF}'\`

   if [ "${NEW_VAL}" != "0000" ]; then

   logger "Failed to enabling directTrans ACS on ${BDF}"

   continue

   fi

   done

   exit 0

.. _mi300x-rccl-unittests:

Run RCCL-Unittests
^^^^^^^^^^^^^^^^^^

In order to verify RCCL installation and test whether all parts and
units of RCCL work as expected you can run the RCCL-Unittests which is
explained in `<https://github.com/ROCm/rccl?tab=readme-ov-file#tests>`__.

.. _mi300x-rccl-npkit:

NPKit profiler
^^^^^^^^^^^^^^

To collect fine-grained trace events in RCCL components, especially in
giant collective GPU kernels you can use the NPKit profiler explained
in `<https://github.com/ROCm/rccl?tab=readme-ov-file#npkit>`__.

.. _mi300x-rccl-tests:

RCCL-tests
^^^^^^^^^^

RCCL-tests are performance and error-checking tests for RCCL
maintained in `<https://github.com/ROCm/rccl-tests>`__.

These tests are one of the best ways to check the performance of
different collectives provided by RCCL. You can select collectives,
message sizes, datatypes, operations, number of iterations, etc., for
your test, and then rccl-tests deliver performance metrics such as
latency, algorithm bandwidth, and bus bandwidth for each case.

.. _mi300x-rccl-one-process-per-gpu:

Use one-process-per-GPU mode
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

RCCL delivers the best performance for collectives when it is configured
in a one-process-per-GPU mode. This is due to the fact that for a
one-process-per-multiple-GPUs configuration, you can run into kernel launch
latency issues. This is because ROCm serializes kernel launches on multiple GPUs
from one process which hurts performance.

.. _mi300x-rccl-e2e:

RCCL in E2E workloads
^^^^^^^^^^^^^^^^^^^^^

Use the following environment variable to increase the number of
channels used by RCCL when using RCCL in end-to-end workloads to potentially
improve the performance:

.. code-block:: text

   export NCCL_MIN_NCHANNELS=112

.. _mi300x-triton-kernel-performance-optimization:

Triton kernel performance optimization
======================================

Triton kernel optimization encompasses a variety of strategies aimed at
maximizing the efficiency and performance of GPU computations. These strategies
include
:ref:`optimizing overall GPU resource utilization <mi300x-triton-gpu-utilization>`,
:ref:`tuning kernel configurations <mi300x-autotunable-kernel-config>`, and
:ref:`leveraging specific hardware features <mi300x-assembly-analysis>` to
achieve higher throughput and lower latency.

.. _mi300x-autotunable-kernel-config:

Auto-tunable kernel configurations
----------------------------------

Auto-tunable kernel configuration involves adjusting memory access and computational
resources assigned to each compute unit. It encompasses the usage of
:ref:`LDS <mi300x-cu-fig>`, register, and task scheduling on a compute unit.

The GPU contains global memory, local data share (LDS), and
registers. Global memory has high access latency, but is large. LDS access has
much lower latency, but is smaller. It is a fast on-CU software-managed memory
that can be used to efficiently share data between all work items in a block.
Register access is the fastest yet smallest among the three.

.. _mi300x-cu-fig:

.. figure:: ../../../data/shared/compute-unit.png

   Schematic representation of a CU in the CDNA2 or CDNA3 architecture.

The following is a list of kernel arguments used for tuning performance and
resource allocation on AMD GPUs, which helps in optimizing the
efficiency and throughput of various computational kernels.

``num_stages=n``
   Adjusts the number of pipeline stages for different types of kernels. On AMD GPUs, set ``num_stages``
   according to the following rules:

   * For kernels with a single GEMM, set to ``2``.

   * For kernels with two GEMMs fused (Flash Attention, or any other kernel
     that fuses 2 GEMMs), set to ``1``.

   * For kernels that fuse a single GEMM with another non-GEMM operator
     (for example ReLU activation), set to ``2``.

   * For kernels that have no GEMMs, set to ``1``.

``waves_per_eu=n``
   Helps to manage Vector General Purpose Registers (VGPR) usage to achieve
   desired occupancy levels. This argument hints to the compiler to reduce VGPR
   to achieve ``n`` occupancy where ``n`` is a number. The goal is to achieve a
   certain occupancy level for each Execution Unit (EU, also called
   :ref:`SIMD Unit <mi300x-cu-fig>`) to achieve better latency or throughput.
   For more information on how to compute occupancy, see
   :ref:`mi300x-compute-kernel-occ`.

   This argument is useful if:

   * The occupancy of the kernel is limited by VGPR usage, and

   * The current VGPR usage is only a few above a boundary in
     :ref:`Occupancy related to VGPR usage in an Instinct MI300X GPU <mi300x-occupancy-vgpr-table>`.

.. _mi300x-occupancy-vgpr-table:

.. figure:: ../../../data/shared/occupancy-vgpr.png
   :alt: Occupancy related to VGPR usage in an Instinct MI300X GPU.
   :align: center

   Occupancy related to VGPRs usage on an Instinct MI300X GPU

For example, according to the table, each Execution Unit (EU) has 512 available
VGPRs, which are allocated in blocks of 16. If the current VGPR usage is 170,
it will be rounded up to 176 due to the allocation granularity. In this case,
the occupancy is limited to 2 waves per EU because :math:`176 \times 3 > 512`.
So, if you set ``waves_per_eu`` to 3, the LLVM backend will attempt to reduce
VGPR usage so that it might fit 3 waves per EU.

``BLOCK_M``, ``BLOCK_N``, ``BLOCK_K``
   Tile sizes to be tuned to balance the memory-to-computation ratio. The goal
   is to minimize the memory transfer from global to shared and reuse memory
   across different threads. This needs to be tuned. The tile sizes should be
   large enough to maximize the efficiency of the memory-to-computation
   ratio but small enough to parallelize the greatest number of workgroups at
   the grid level.

``matrix_instr_nonkdim``
   Experimental feature for Flash Attention-like kernels that determines the size of the Matrix Fused Multiply-Add
   (MFMA) instruction used.

   -  ``matrix_instr_nonkdim = 16``: ``mfma_16x16`` is used.

   -  ``matrix_instr_nonkdim = 32``: ``mfma_32x32`` is used.

   For GEMM kernels on an MI300X GPU, ``mfma_16x16`` typically outperforms ``mfma_32x32``, even for large
   tile/GEMM sizes.


.. _mi300x-triton-gpu-utilization:

Overall GPU resource utilization
--------------------------------

As depicted in the following figure, each XCD in
:doc:`MI300X </conceptual/gpu-arch/mi300>` contains 40 compute units (CUs),
with 38 active. Each MI300X contains eight vertical XCDs, and a total of 304
active compute units capable of parallel computation. The first consideration is
the number of CUs a kernel can distribute its task across.

.. figure:: ../../../data/shared/xcd-sys-arch.png

   XCD-level system architecture showing 40 compute units,
   each with 32 KB L1 cache, a unified compute system with 4 ACE compute
   GPUs, shared 4MB of L2 cache, and a hardware scheduler (HWS).

You can query hardware resources with the command ``rocminfo`` in the
``/opt/rocm/bin`` directory. For instance, query the number of CUs, number of
SIMD, and wavefront size using the following commands.

.. code-block:: shell

   rocminfo | grep "Compute Unit"

   rocminfo | grep "SIMD"

   rocminfo | grep "Wavefront Size"

For the MI300X, the goal is to have a minimum of 1024 thread
blocks or workgroups in the grid (kernel), with a preference for
more.

Identifying additional parallelism within the algorithm is necessary to
enhance GPU utilization. For more information and examples, see
`Accelerating A Triton Fused Kernel For W4a16 Quantized Inference With
SplitK Work Decomposition <https://arxiv.org/pdf/2402.00025v1>`__.

.. _mi300x-mlir-analysis:

MLIR analysis
-------------

Triton includes the following layouts: **blocked**, **shared**, **sliced**, and **MFMA**.

Use the Triton GPU Intermediate Representation (IR) to identify the memory in
which each computation takes place.

Use the environment variable ``MLIR_ENABLE_DUMP`` to dump MLIR:

.. code-block:: shell

   export MLIR_ENABLE_DUMP=1

The following is a snippet of IR from the Flash Attention decode ``int4`` KV program. It is to
de-quantize the ``int4`` key-value from the ``int4`` data type to ``fp16``.

.. code-block:: text

   %190 = tt.load %189 {cache = 1 : i32, evict = 1 : i32, isVolatile =
   false} : tensor<1x64xi32, #blocked6> loc(#loc159)

   %266 = arith.andi %190, %cst_28 : tensor<1x64xi32, #blocked6>
   loc(#loc250)

   %267 = arith.trunci %266 : tensor<1x64xi32, #blocked6> to
   tensor<1x64xi16, #blocked6> loc(#loc251)

   %268 = tt.bitcast %267 : tensor<1x64xi16, #blocked6> -> tensor<1x64xf16,
   #blocked6> loc(#loc252)

   %269 = triton_gpu.convert_layout %268 : (tensor<1x64xf16, #blocked6>) ->
   tensor<1x64xf16, #shared1> loc(#loc252)

   %270 = tt.trans %269 : (tensor<1x64xf16, #shared1>) -> tensor<64x1xf16,
   #shared2> loc(#loc194)

   %276 = triton_gpu.convert_layout %270 : (tensor<64x1xf16, #shared2>) ->
   tensor<64x1xf16, #blocked5> loc(#loc254)

   %293 = arith.mulf %276, %cst_30 : tensor<64x1xf16, #blocked5>
   loc(#loc254)

   %295 = arith.mulf %292, %294 : tensor<64x32xf16, #blocked5> loc(#loc264)

   %297 = arith.addf %295, %296 : tensor<64x32xf16, #blocked5> loc(#loc255)

   %298 = triton_gpu.convert_layout %297 : (tensor<64x32xf16, #blocked5>)
   -> tensor<64x32xf16, #shared1> loc(#loc255)

   %299 = tt.trans %298 : (tensor<64x32xf16, #shared1>) ->
   tensor<32x64xf16, #shared2> loc(#loc196)

   %300 = triton_gpu.convert_layout %299 : (tensor<32x64xf16, #shared2>) ->
   tensor<32x64xf16, #triton_gpu.dot_op<{opIdx = 1, parent = #mfma, kWidth
   = 4}>> loc(#loc197)

From the IR snippet, you can see ``i32`` data is loaded from global memory to
registers (``%190``). With a few element-wise operations in registers, it is
stored in shared memory (``%269``) for the transpose operation (``%270``), which
needs data movement across different threads. With the transpose done, it is
loaded from LDS to register again (``%276``), and with a few more
element-wise operations, it is stored to LDS again (``%298``). The last step
loads from LDS to registers and converts to the dot-operand layout
(``%300``).

The IR snippet uses the LDS twice. The first is for the transpose, and
the second is to convert a blocked layout to a dot operand layout.
There’s an opportunity to optimize performance by using LDS once.

.. _mi300x-assembly-analysis:

ISA assembly analysis
---------------------

To generate ISA, ``export AMDGCN_ENABLE_DUMP=1`` when running the Triton
program. The generated ISA will be printed as standard output. You can
dump it to a file for analysis.

*  Ensure ``global_load_dwordx4`` is used in the ISA, especially when the
   global memory load happens in the loop.

*  In most cases, the LDS load and store should use ``_b128`` to
   minimize the number of LDS access instructions.

*  The AMD ISA has ``s_waitcnt`` instruction to synchronize the dependency
   of memory access and computations. The ``s_waitcnt`` instructions can
   typically have two signals in the Triton context:

   *  ``lgkmcnt(n)``: ``lgkm`` stands for LDS, GDS
      (Global Data Share), Constant, and Message. It is often related to
      LDS access. The ``n`` indicates the number of data accesses can still
      be ongoing before moving on to the next step. For example, if ``n`` is
      ``0``, wait for all ``lgkm`` access to finish before continuing. If ``n``
      is ``1``, move on even if ``1`` ``lgkm`` access is still running
      asynchronously.

   *  ``vmcnt(n)``: ``vm`` represents vector memory. This happens when
      vector memory is accessed, for example, when global load moves
      from global memory to vector memory. The variable ``n`` is the same as
      the previous setting.

Generally recommended guidelines are as follows.

*  Vectorize memory access as much as possible.

*  Ensure synchronization is done efficiently.

*  Overlap of instructions to hide latency, but it requires thoughtful
   analysis of the algorithms.

*  If you find inefficiencies, you can trace it back to LLVM IR, TTGIR
   and even TTIR to see where the problem comes from. If you find it
   during compiler optimization, activate the MLIR dump
   (``export MLIR_ENABLE_DUMP=1``) and check which optimization pass caused the
   problem.

.. _mi300x-hip-optimization:

HIP performance optimization
============================

This section summarizes the best practices described in the
:doc:`Performance guidelines <hip:how-to/performance_guidelines>` section of the
HIP documentation.

Optimization areas of concern include:

* Parallel execution

* Memory usage optimization

* Optimization for maximum throughput

* Minimizing memory thrashing

Parallel execution and GPU hardware utilization
-----------------------------------------------

The application should reveal and efficiently imply as much parallelism as
possible for optimal use to keep all system components active.

Memory usage optimization
-------------------------

To optimize memory throughput, minimize low-bandwidth data transfers,
particularly between the host and device. Maximize on-chip memory, including
shared memory and caches, to reduce data transfers between global memory and the
device.

In a GPU, global memory has high latency but a large size, while local data
share (LDS) has lower latency but a smaller size, and registers have the fastest
but smallest access. Aim to limit load/store operations in global memory. If
multiple threads in a block need the same data, transfer it from global memory
to LDS for efficient access.

See :doc:`HIP's performance guidelines <hip:how-to/performance_guidelines>` for
greater detail.

Diagnostic and performance analysis
===================================

.. _mi300x-rocr-debug-agent:

Debug memory access faults
--------------------------

Identifying a faulting kernel is often enough to triage a memory access
fault. The ROCr Debug Agent can trap a memory access fault and provide a
dump of all active wavefronts that caused the error, as well as the name
of the kernel. For more information, see
:doc:`ROCr Debug Agent documentation <rocr_debug_agent:index>`.

To summarize, the key points include:

1. Compiling with ``-ggdb -O0`` is recommended but not required.

2. ``HSA_TOOLS_LIB=/opt/rocm/lib/librocm-debug-agent.so.2 HSA_ENABLE_DEBUG=1 ./my_program``

When the debug agent traps the fault, it produces verbose output of all
wavefront registers and memory content. Importantly, it also prints
something similar to the following:

.. code-block:: text

   Disassembly for function vector_add_assert_trap(int*, int*, int*):

   code object:
   file:////rocm-debug-agent/build/test/rocm-debug-agent-test#offset=14309&size=31336

   loaded at: [0x7fd4f100c000-0x7fd4f100e070]

The kernel name and the code object file should be listed. In the
example above, the kernel name is vector_add_assert_trap, but this might
also look like:

.. code-block:: text

   Disassembly for function memory:///path/to/codeobject#offset=1234&size=567:

In this case, it's an in-memory kernel that was generated at runtime.
Using the environment variable ``ROCM_DEBUG_AGENT_OPTIONS="--all --save-code-objects"``
will have the debug agent save all code objects to the current directory. Use
``--save-code-objects=[DIR]`` to save them in another location.

The code objects will be renamed from the URI format with special
characters replaced by ‘_’. Use ``llvm-objdump`` to disassemble the
indicated in-memory code object that has been saved to disk. The name of
the kernel is often found in the disassembled code object.

.. code-block:: shell

   llvm-objdump --disassemble-all path/to/code-object.co

Disabling memory caching strategies within the ROCm stack and PyTorch is
recommended, where possible. This gives the debug agent the best chance
of finding the memory fault where it originates. Otherwise, it could be
masked by writing past the end of a cached block within a larger
allocation.

.. code-block:: text

   PYTORCH_NO_HIP_MEMORY_CACHING=1

   HSA_DISABLE_FRAGMENT_ALLOCATOR=1

.. _mi300x-compute-kernel-occ:

Compute the occupancy of a kernel
---------------------------------

1. Get the VGPR count, search for ``.vgpr_count`` in the ISA (for example,
   ``N``).

2. Get the allocated LDS following the steps (for example, L for the kernel).

   a. ``export MLIR_ENABLE_DUMP=1``

   b. ``rm -rf ~/.triton/cache``

   c. ``python kernel.py | | grep "triton_gpu.shared = " | tail -n 1``

   d. You should see something like ``triton_gpu.shared = 65536``, indicating
      65536 bytes of LDS are allocated for the kernel.

3. Get number of waves per workgroup using the following steps (for example, ``nW``).

   a. ``export MLIR_ENABLE_DUMP=1``

   b. ``rm -rf ~/.triton/cache``

   c. ``python kernel.py | | grep "triton_gpu.num-warps " | tail -n 1``

   d. You should see something like ``“triton_gpu.num-warps" = 8``, indicating 8
      waves per workgroup.

4. Compute occupancy limited by VGPR based on N according to the
   :ref:`preceding table <mi300x-occupancy-vgpr-table>`. For example, waves per
   EU as ``occ_vgpr``.

5. Compute occupancy limited by LDS based on L by: ``occ_lds = floor(65536 / L)``.

6. Then the occupancy is ``occ = min(floor(occ_vgpr * 4 / nW), occ_lds) * nW / 4``

   a. ``occ_vgpr \* 4`` gives the total number of waves on all 4 execution units (SIMDs)
      per CU.

   b. ``floor(occ_vgpr * 4 / nW)`` gives the occupancy of workgroups per CU
      regrading VGPR usage.

   c. The true ``occ`` is the minimum of the two.

Find the full ``occ.sh`` at
`<https://github.com/ROCm/triton/blob/triton-mlir/scripts/amd/occ.sh>`__.

Special considerations
======================

Multi-GPU communications
------------------------

Because of the characteristics of MI300X inter-GPU communication and
limitation of bandwidth between and among 2 GPUs and 4 GPUs, avoid running
workloads that use 2 or 4 GPU collectives. It's optimal to either use a
single GPU (where no collective is required) or employ 8 GPU
collectives.

Multi-node FSDP and RCCL settings
---------------------------------

When using PyTorch's FSDP (Full Sharded Data Parallel) feature, the HIP
streams used by RCCL and HIP streams used for compute kernels do not
always overlap well. As a workaround, it's recommended to use
high-priority HIP streams with RCCL.

To configure high-priority streams:

-  Set environment variable ``TORCH_NCCL_HIGH_PRIORITY=1`` to force all RCCL
   streams to be high-priority.

-  Set environment variable ``GPU_MAX_HW_QUEUES=2`` via the HIP runtime
   library.

Hardware efficiency is maximized with 4 or fewer HIP streams. These environment variables limit the
configuration to two compute streams and two RCCL streams, aligning with this best practice.
Additionally, RCCL is often pre-optimized for MI300 systems in production by querying the node
topology during startup, reducing the need for extensive manual tuning.

Further reading
===============

* :doc:`vllm-optimization`