!!! hint
    If you are coming from Requests, `httpx.Client()` is what you can use instead of `requests.Session()`.

## Why use a Client?

!!! note "TL;DR"
    If you do anything more than experimentation, one-off scripts, or prototypes, then you should use a `Client` instance.

**More efficient usage of network resources**

When you make requests using the top-level API as documented in the [Quickstart](../quickstart.md) guide, HTTPX has to establish a new connection _for every single request_ (connections are not reused). As the number of requests to a host increases, this quickly becomes inefficient.

On the other hand, a `Client` instance uses [HTTP connection pooling](https://en.wikipedia.org/wiki/HTTP_persistent_connection). This means that when you make several requests to the same host, the `Client` will reuse the underlying TCP connection, instead of recreating one for every single request.

This can bring **significant performance improvements** compared to using the top-level API, including:

- Reduced latency across requests (no handshaking).
- Reduced CPU usage and round-trips.
- Reduced network congestion.

**Extra features**

`Client` instances also support features that aren't available at the top-level API, such as:

- Cookie persistence across requests.
- Applying configuration across all outgoing requests.
- Sending requests through HTTP proxies.
- Using [HTTP/2](../http2.md).

The other sections on this page go into further detail about what you can do with a `Client` instance.

## Usage

The recommended way to use a `Client` is as a context manager. This will ensure that connections are properly cleaned up when leaving the `with` block:

```python
with httpx.Client() as client:
    ...
```

Alternatively, you can explicitly close the connection pool without block-usage using `.close()`:

```python
client = httpx.Client()
try:
    ...
finally:
    client.close()
```

## Making requests

Once you have a `Client`, you can send requests using `.get()`, `.post()`, etc. For example:

```pycon
>>> with httpx.Client() as client:
...     r = client.get('https://example.com')
...
>>> r
<Response [200 OK]>
```

These methods accept the same arguments as `httpx.get()`, `httpx.post()`, etc. This means that all features documented in the [Quickstart](../quickstart.md) guide are also available at the client level.

For example, to send a request with custom headers:

```pycon
>>> with httpx.Client() as client:
...     headers = {'X-Custom': 'value'}
...     r = client.get('https://example.com', headers=headers)
...
>>> r.request.headers['X-Custom']
'value'
```

## Sharing configuration across requests

Clients allow you to apply configuration to all outgoing requests by passing parameters to the `Client` constructor.

For example, to apply a set of custom headers _on every request_:

```pycon
>>> url = 'http://httpbin.org/headers'
>>> headers = {'user-agent': 'my-app/0.0.1'}
>>> with httpx.Client(headers=headers) as client:
...     r = client.get(url)
...
>>> r.json()['headers']['User-Agent']
'my-app/0.0.1'
```

## Merging of configuration

When a configuration option is provided at both the client-level and request-level, one of two things can happen:

- For headers, query parameters and cookies, the values are combined together. For example:

```pycon
>>> headers = {'X-Auth': 'from-client'}
>>> params = {'client_id': 'client1'}
>>> with httpx.Client(headers=headers, params=params) as client:
...     headers = {'X-Custom': 'from-request'}
...     params = {'request_id': 'request1'}
...     r = client.get('https://example.com', headers=headers, params=params)
...
>>> r.request.url
URL('https://example.com?client_id=client1&request_id=request1')
>>> r.request.headers['X-Auth']
'from-client'
>>> r.request.headers['X-Custom']
'from-request'
```

- For all other parameters, the request-level value takes priority. For example:

```pycon
>>> with httpx.Client(auth=('tom', 'mot123')) as client:
...     r = client.get('https://example.com', auth=('alice', 'ecila123'))
...
>>> _, _, auth = r.request.headers['Authorization'].partition(' ')
>>> import base64
>>> base64.b64decode(auth)
b'alice:ecila123'
```

If you need finer-grained control on the merging of client-level and request-level parameters, see [Request instances](#request-instances).

## Other Client-only configuration options

Additionally, `Client` accepts some configuration options that aren't available at the request level.

For example, `base_url` allows you to prepend an URL to all outgoing requests:

```pycon
>>> with httpx.Client(base_url='http://httpbin.org') as client:
...     r = client.get('/headers')
...
>>> r.request.url
URL('http://httpbin.org/headers')
```

For a list of all available client parameters, see the [`Client`](../api.md#client) API reference.

---

## Request instances

For maximum control on what gets sent over the wire, HTTPX supports building explicit [`Request`](../api.md#request) instances:

```python
request = httpx.Request("GET", "https://example.com")
```

To dispatch a `Request` instance across to the network, create a [`Client` instance](#client-instances) and use `.send()`:

```python
with httpx.Client() as client:
    response = client.send(request)
    ...
```

If you need to mix client-level and request-level options in a way that is not supported by the default [Merging of parameters](#merging-of-parameters), you can use `.build_request()` and then make arbitrary modifications to the `Request` instance. For example:

```python
headers = {"X-Api-Key": "...", "X-Client-ID": "ABC123"}

with httpx.Client(headers=headers) as client:
    request = client.build_request("GET", "https://api.example.com")

    print(request.headers["X-Client-ID"])  # "ABC123"

    # Don't send the API key for this particular request.
    del request.headers["X-Api-Key"]

    response = client.send(request)
    ...
```

## Monitoring download progress

If you need to monitor download progress of large responses, you can use response streaming and inspect the `response.num_bytes_downloaded` property.

This interface is required for properly determining download progress, because the total number of bytes returned by `response.content` or `response.iter_content()` will not always correspond with the raw content length of the response if HTTP response compression is being used.

For example, showing a progress bar using the [`tqdm`](https://github.com/tqdm/tqdm) library while a response is being downloaded could be done like this…

```python
import tempfile

import httpx
from tqdm import tqdm

with tempfile.NamedTemporaryFile() as download_file:
    url = "https://speed.hetzner.de/100MB.bin"
    with httpx.stream("GET", url) as response:
        total = int(response.headers["Content-Length"])

        with tqdm(total=total, unit_scale=True, unit_divisor=1024, unit="B") as progress:
            num_bytes_downloaded = response.num_bytes_downloaded
            for chunk in response.iter_bytes():
                download_file.write(chunk)
                progress.update(response.num_bytes_downloaded - num_bytes_downloaded)
                num_bytes_downloaded = response.num_bytes_downloaded
```

![tqdm progress bar](../img/tqdm-progress.gif)

Or an alternate example, this time using the [`rich`](https://github.com/willmcgugan/rich) library…

```python
import tempfile
import httpx
import rich.progress

with tempfile.NamedTemporaryFile() as download_file:
    url = "https://speed.hetzner.de/100MB.bin"
    with httpx.stream("GET", url) as response:
        total = int(response.headers["Content-Length"])

        with rich.progress.Progress(
            "[progress.percentage]{task.percentage:>3.0f}%",
            rich.progress.BarColumn(bar_width=None),
            rich.progress.DownloadColumn(),
            rich.progress.TransferSpeedColumn(),
        ) as progress:
            download_task = progress.add_task("Download", total=total)
            for chunk in response.iter_bytes():
                download_file.write(chunk)
                progress.update(download_task, completed=response.num_bytes_downloaded)
```

![rich progress bar](../img/rich-progress.gif)

## Monitoring upload progress

If you need to monitor upload progress of large responses, you can use request content generator streaming.

For example, showing a progress bar using the [`tqdm`](https://github.com/tqdm/tqdm) library.

```python
import io
import random

import httpx
from tqdm import tqdm


def gen():
    """
    this is a complete example with generated random bytes.
    you can replace `io.BytesIO` with real file object.
    """
    total = 32 * 1024 * 1024  # 32m
    with tqdm(ascii=True, unit_scale=True, unit='B', unit_divisor=1024, total=total) as bar:
        with io.BytesIO(random.randbytes(total)) as f:
            while data := f.read(1024):
                yield data
                bar.update(len(data))


httpx.post("https://httpbin.org/post", content=gen())
```

![tqdm progress bar](../img/tqdm-progress.gif)

## Multipart file encoding

As mentioned in the [quickstart](../quickstart.md#sending-multipart-file-uploads)
multipart file encoding is available by passing a dictionary with the
name of the payloads as keys and either tuple of elements or a file-like object or a string as values.

```pycon
>>> with open('report.xls', 'rb') as report_file:
...     files = {'upload-file': ('report.xls', report_file, 'application/vnd.ms-excel')}
...     r = httpx.post("https://httpbin.org/post", files=files)
>>> print(r.text)
{
  ...
  "files": {
    "upload-file": "<... binary content ...>"
  },
  ...
}
```

More specifically, if a tuple is used as a value, it must have between 2 and 3 elements:

- The first element is an optional file name which can be set to `None`.
- The second element may be a file-like object or a string which will be automatically
encoded in UTF-8.
- An optional third element can be used to specify the
[MIME type](https://developer.mozilla.org/en-US/docs/Web/HTTP/Basics_of_HTTP/MIME_Types)
of the file being uploaded. If not specified HTTPX will attempt to guess the MIME type based
on the file name, with unknown file extensions defaulting to "application/octet-stream".
If the file name is explicitly set to `None` then HTTPX will not include a content-type
MIME header field.

```pycon
>>> files = {'upload-file': (None, 'text content', 'text/plain')}
>>> r = httpx.post("https://httpbin.org/post", files=files)
>>> print(r.text)
{
  ...
  "files": {},
  "form": {
    "upload-file": "text-content"
  },
  ...
}
```

!!! tip
    It is safe to upload large files this way. File uploads are streaming by default, meaning that only one chunk will be loaded into memory at a time.

 Non-file data fields can be included in the multipart form using by passing them to `data=...`.

You can also send multiple files in one go with a multiple file field form.
To do that, pass a list of `(field, <file>)` items instead of a dictionary, allowing you to pass multiple items with the same `field`.
For instance this request sends 2 files, `foo.png` and `bar.png` in one request on the `images` form field:

```pycon
>>> with open('foo.png', 'rb') as foo_file, open('bar.png', 'rb') as bar_file:
...     files = [
...         ('images', ('foo.png', foo_file, 'image/png')),
...         ('images', ('bar.png', bar_file, 'image/png')),
...     ]
...     r = httpx.post("https://httpbin.org/post", files=files)
```