# Source: https://learn.adafruit.com/tron-bag/splitting.md

# TRON Bag

## Splitting

For the pocket detail, we wanted to have a piece of EL that split in two, this is possible but a little trickier than just a single piece. Make sure you're comfortable with soldering to EL wire since you'll need to solder to two ends, thus doubling the difficulty

You'll want to cut the first piece a little long, again, and then solder **two** pieces of ribbon or other thin stranded wire to both the core and corona wires. Each one can go to another EL piece.

![](https://cdn-learn.adafruit.com/assets/assets/000/000/737/medium800/el_wire_tape_panel_ydetail.jpg?1396765436)

This time, start sewing from the junction, so that its centered.

![](https://cdn-learn.adafruit.com/assets/assets/000/000/738/medium800/el_wire_tape_panel_yplace.jpg?1396765443)

![](https://cdn-learn.adafruit.com/assets/assets/000/000/739/medium800/el_wire_tape_panel_ystitched.jpg?1396765451)

![](https://cdn-learn.adafruit.com/assets/assets/000/000/740/medium800/el_wire_tape_panel_flapstaped2.jpg?1396765459)

- [Previous Page](https://learn.adafruit.com/tron-bag/detailing.md)
- [Next Page](https://learn.adafruit.com/tron-bag/finishing.md)

## Featured Products

### Heat Shrink Pack

[Heat Shrink Pack](https://www.adafruit.com/product/344)
Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables. We use this stuff all the time and having a zip-lock bag of all the possible sizes is super...

In Stock
[Buy Now](https://www.adafruit.com/product/344)
[Related Guides to the Product](https://learn.adafruit.com/products/344/guides)
### In-line wire 1-to-4 splitter

[In-line wire 1-to-4 splitter](https://www.adafruit.com/product/402)
If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and then 4 female connectors (which will connect to each wire/strip/panel. You can even cascade them! Only thing to watch for is make...

In Stock
[Buy Now](https://www.adafruit.com/product/402)
[Related Guides to the Product](https://learn.adafruit.com/products/402/guides)
### EL wire starter pack - Blue 2.5 meter (8.2 ft)

[EL wire starter pack - Blue 2.5 meter (8.2 ft)](https://www.adafruit.com/product/583)
A little bundle to get you started! This project pack contains:

- [2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Blue](http://www.adafruit.com/products/408). 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready...

Out of Stock
[Buy Now](https://www.adafruit.com/product/583)
[Related Guides to the Product](https://learn.adafruit.com/products/583/guides)

## Related Guides

- [Battery Powering Wearable Electronics](https://learn.adafruit.com/battery-powering-wearable-electronics.md)
- [3D Printed Daft Punk Helmet with Bluetooth ](https://learn.adafruit.com/3d-printed-daft-punk-helmet-with-bluetooth.md)
- [3D Printed Wearable Video Goggles](https://learn.adafruit.com/3d-printed-wearable-video-goggles.md)
- [Decorative Pointy Elf Ear Bud Holders](https://learn.adafruit.com/elf-ears.md)
- [LED Friendship Bracelet](https://learn.adafruit.com/nautical-led-bracelet.md)
- [Make a Zelda Master Sword with the RP2040 Prop-Maker Feather](https://learn.adafruit.com/master-sword-rp2040.md)
- [USB Locket](https://learn.adafruit.com/usb-locket.md)
- [Light Up your Costume with Noods](https://learn.adafruit.com/light-up-your-costume-with-noods.md)
- [Pac Man Pixel Suspenders](https://learn.adafruit.com/pac-man-pixel-suspenders.md)
- [3D Printed LED Buckle](https://learn.adafruit.com/3d-printed-led-buckle.md)
- [Adafruit Flora Bluefruit LE](https://learn.adafruit.com/adafruit-flora-bluefruit-le.md)
- [Textile Potentiometer Hoodie](https://learn.adafruit.com/textile-potentiometer-hoodie.md)
- [Cynaps Bone Conduction Headset Teardown](https://learn.adafruit.com/cynaps-bone-conduction-headset-teardown.md)
- [Glowing Bean Bags with EL Wire](https://learn.adafruit.com/glowing-bean-bags-with-el-wire.md)
- [3D Printed Gunblade](https://learn.adafruit.com/3d-printed-gunblade.md)