# Source: https://learn.adafruit.com/smt-manufacturing/squeegees.md

# SMT Manufacturing

## Squeegees

So you have your PCBs, cooled paste, your stencils and your stenciling machine. Only thing you need now is to apply it! This is the final tutorial in the SMT stencil series!## $5 Squeegees
We do manual paste deposition. We tried a whole bunch of different, expensive squeegees, but in the end we really just liked the nice rubber-gripped paint scrapers at the hardware store down the street.  
![](https://cdn-learn.adafruit.com/assets/assets/000/000/330/medium800/manufacturing_scrapers.jpg?1396760910)

We have two: one 4" and one 1" wide. We like a 1" one for mixing up paste after its taken from the fridge. This gets it warmed up and easier to work with.![](https://cdn-learn.adafruit.com/assets/assets/000/000/331/medium800/manufacturing_squish.jpg?1396759608)

![](https://cdn-learn.adafruit.com/assets/assets/000/000/332/medium800/manufacturing_pastespoon.jpg?1396759602)

We then use the paste spooned out to apply it to the larger spatula.![](https://cdn-learn.adafruit.com/assets/assets/000/000/333/medium800/manufacturing_transfer.jpg?1396759595)

Pull the spatula against the stencil. Getting this right takes a lot of practice, you need to get angle, pressure, and amount of paste correct.![](https://cdn-learn.adafruit.com/assets/assets/000/000/334/medium800/manufacturing_ready.jpg?1396759587)

Sometimes we have a big stencil so we only do one side at a time.![](https://cdn-learn.adafruit.com/assets/assets/000/000/335/medium800/manufacturing_halfpaste.jpg?1396759580)

We have a technique we use, we usually do two wipes. One is at a more acute angle, where we push the paste thru the stencil.![](https://cdn-learn.adafruit.com/assets/assets/000/000/336/medium800/manufacturing_smoosh.jpg?1396762272)

Then we go at a wider angle, to scrape the paste off.![](https://cdn-learn.adafruit.com/assets/assets/000/000/337/medium800/manufacturing_second.jpg?1396762278)

That's it! It does take practice. We had to do 50 boards before we really got the hang of it.![](https://cdn-learn.adafruit.com/assets/assets/000/000/338/medium800/manufacturing_scraperpasted.jpg?1396762284)

- [Previous Page](https://learn.adafruit.com/smt-manufacturing/jedec-trays.md)
- [Next Page](https://learn.adafruit.com/smt-manufacturing/smt-wipes.md)

## Featured Products

### Fine tip curved tweezers - ESD safe

[Fine tip curved tweezers - ESD safe](https://www.adafruit.com/product/422)
When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to pick up any size component. This...

In Stock
[Buy Now](https://www.adafruit.com/product/422)
[Related Guides to the Product](https://learn.adafruit.com/products/422/guides)
### Fine tip straight tweezers - ESD safe

[Fine tip straight tweezers - ESD safe](https://www.adafruit.com/product/421)
When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These tweezers are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to pick up any size...

In Stock
[Buy Now](https://www.adafruit.com/product/421)
[Related Guides to the Product](https://learn.adafruit.com/products/421/guides)
### USB Microscope - 5MP interpolated 220x magnification / 8 LEDs

[USB Microscope - 5MP interpolated 220x magnification / 8 LEDs](https://www.adafruit.com/product/636)
As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a 2 megapixel sensor inside and an optical...

Out of Stock
[Buy Now](https://www.adafruit.com/product/636)
[Related Guides to the Product](https://learn.adafruit.com/products/636/guides)

## Related Guides

- [Reindeer Solder Kit by Phyx](https://learn.adafruit.com/reindeer-solder-kit-by-phyx.md)
- [3D-Printed Solder Paste Dispenser Hand Switch ](https://learn.adafruit.com/3d-printed-solder-paste-dispenser-hand-switch.md)
- [USB Rechargeable Mini Solder Fume Extractor](https://learn.adafruit.com/usb-rechargeable-mini-solder-fume-extractor.md)
- [How to Sign Windows Drivers & Executables](https://learn.adafruit.com/how-to-sign-windows-drivers-installer.md)
- [Desktop Fume Extractor](https://learn.adafruit.com/desktop-fume-extractor.md)
- [Chinese Dragon Puppet with Motion-Reactive Flame Effect](https://learn.adafruit.com/chinese-dragon-puppet-with-motion-reactive-flame-effect.md)
- [16-Step Drum Sequencer](https://learn.adafruit.com/16-step-drum-sequencer.md)
- [Color Sensing Music Player](https://learn.adafruit.com/color-sensing-music-player.md)
- [Light-Up Costumes in Harsh Environments](https://learn.adafruit.com/light-up-costumes-in-harsh-environments.md)
- [Garden Path Lights with WLED and a Sunset Timer](https://learn.adafruit.com/garden-path-lights-with-sunset-timer.md)
- [CNC Rotary Macropad](https://learn.adafruit.com/cnc-rotary-macropad.md)
- [Blinka Says Tabletop Arcade Game](https://learn.adafruit.com/blinka-says-tabletop-arcade-game.md)
- [IoT Moon Phase Guide](https://learn.adafruit.com/moon-phase.md)
- [KTOWN's Ultimate Creating Parts in Eagle Tutorial](https://learn.adafruit.com/ktowns-ultimate-creating-parts-in-eagle-tutorial.md)
- [Shop Tips & Tricks](https://learn.adafruit.com/shop-tips-and-tricks.md)