# Source: https://learn.adafruit.com/adafruit-motor-shield/forums.md

# Source: https://learn.adafruit.com/rgb-lcd-shield/forums.md

# Source: https://learn.adafruit.com/tron-bag/forums.md

# TRON Bag

## Forums

- [Previous Page](https://learn.adafruit.com/tron-bag/finishing.md)

## Featured Products

### Heat Shrink Pack

[Heat Shrink Pack](https://www.adafruit.com/product/344)
Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables. We use this stuff all the time and having a zip-lock bag of all the possible sizes is super...

In Stock
[Buy Now](https://www.adafruit.com/product/344)
[Related Guides to the Product](https://learn.adafruit.com/products/344/guides)
### In-line wire 1-to-4 splitter

[In-line wire 1-to-4 splitter](https://www.adafruit.com/product/402)
If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and then 4 female connectors (which will connect to each wire/strip/panel. You can even cascade them! Only thing to watch for is make...

In Stock
[Buy Now](https://www.adafruit.com/product/402)
[Related Guides to the Product](https://learn.adafruit.com/products/402/guides)
### EL wire starter pack - Blue 2.5 meter (8.2 ft)

[EL wire starter pack - Blue 2.5 meter (8.2 ft)](https://www.adafruit.com/product/583)
A little bundle to get you started! This project pack contains:

- [2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Blue](http://www.adafruit.com/products/408). 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready...

Out of Stock
[Buy Now](https://www.adafruit.com/product/583)
[Related Guides to the Product](https://learn.adafruit.com/products/583/guides)

## Related Guides

- [Battery Powering Wearable Electronics](https://learn.adafruit.com/battery-powering-wearable-electronics.md)
- [3D Printed Daft Punk Helmet with Bluetooth ](https://learn.adafruit.com/3d-printed-daft-punk-helmet-with-bluetooth.md)
- [3D Printed Wearable Video Goggles](https://learn.adafruit.com/3d-printed-wearable-video-goggles.md)
- [Decorative Pointy Elf Ear Bud Holders](https://learn.adafruit.com/elf-ears.md)
- [LED Friendship Bracelet](https://learn.adafruit.com/nautical-led-bracelet.md)
- [Make a Zelda Master Sword with the RP2040 Prop-Maker Feather](https://learn.adafruit.com/master-sword-rp2040.md)
- [USB Locket](https://learn.adafruit.com/usb-locket.md)
- [Light Up your Costume with Noods](https://learn.adafruit.com/light-up-your-costume-with-noods.md)
- [Pac Man Pixel Suspenders](https://learn.adafruit.com/pac-man-pixel-suspenders.md)
- [3D Printed LED Buckle](https://learn.adafruit.com/3d-printed-led-buckle.md)
- [Adafruit Flora Bluefruit LE](https://learn.adafruit.com/adafruit-flora-bluefruit-le.md)
- [Textile Potentiometer Hoodie](https://learn.adafruit.com/textile-potentiometer-hoodie.md)
- [Cynaps Bone Conduction Headset Teardown](https://learn.adafruit.com/cynaps-bone-conduction-headset-teardown.md)
- [Glowing Bean Bags with EL Wire](https://learn.adafruit.com/glowing-bean-bags-with-el-wire.md)
- [3D Printed Gunblade](https://learn.adafruit.com/3d-printed-gunblade.md)